Unit 9, 36 Hornock Rd.
Coatbridge, ML5 2QA

Cehisa Flexy Edgebander

The Cehisa Flexy Edgebander is a hot melt compact automatic through feed edgebander suitable for melamine, PVC, ABS, PP and veneer edging up to a thickness of 2mm. An intuitive 3.5″ touch screen control gives the operator quick access for monitoring all machine functions including start and stop, program editing, parameters check and editing, alarm diagnostics etc all in real time. Panels are fed through the machine with an industrial chain-track system running on ground steel guides. Non-marking traction pads ensure a positive feed without damaging the panel surface while the synchronised top pressure beam with two sets of rollers keeps the panel secured against the track. Cehisa Flexy Edgebander Brochure

 

Click here to check out the Cehisa Flexy Edgebander in our eBay shop

Cehisa Flexy Edgebander Features

  • Touch screen control
  • Synchronised pressure beam
  • Hot melt glue Application
  • Pre-milling option
  • Duo melt option for use of EVA / PUR glue
  • High frequency motors with independant inverters
  • Air cleaning to tracers
  • Fully enclosed working units
  • Individual dust / swarf extraction hoods to all working units

Contact us for more information or click on  the add to quote button and we will contact you soon.

 

Main UK Distributor Of New And Used Cehisa Flexy Edgebanders Based in Central Scotland

London – 07867 950 153 ● Telford – 07746 486 341

Glasgow – 01236 432 700 ● Manchester – 07909 290 209

Description

Cehisa Flexy Edgebander

The Cehisa Flexy Edgebander is a hot melt compact automatic through feed edgebander suitable for melamine, PVC, ABS, PP and veneer edging up to a thickness of 2mm. An intuitive 3.5″ touch screen control gives the operator quick access for monitoring all machine functions including start and stop, program editing, parameters check and editing, alarm diagnostics etc all in real time. Panels are fed through the machine with an industrial chain-track system running on ground steel guides. Non-marking traction pads ensure a positive feed without damaging the panel surface while the synchronised top pressure beam with two sets of rollers keeps the panel secured against the track. There are four models within the Cehisa Flexy Edgebander range.

 

Cehisa Manufacturers Website

 

MACHINE DESCRIPTION

Feeding Unit
Roll tray for edge band in rolls.
Timer controlled automatic feed allowing the precise adjustment of the in-feed surplus and minimizing the waste of edging material.
Pneumatic cut-off guillotine (fit for PVC/ABS edges of up to 2 mm thickness).
Pre-milling Unit PF-2
2 HF motors – the first 1,1 kW rotating CW and the second 0,75 kW, rotating CCW, with pneumatic pressure control on both motors, providing optimum finish.
Milling heads with welded DIA bits:
Standard tooling spec: Ø60 Ø20 H30 Z6.
 OPTIONAL tooling spec: Ø60 Ø20 H55 Z6.
Glue Application Unit M2-NS
New design with improved thermodynamics, grating a shorter heating with less power consumption (2,5 kW). Full TEFLON® coating of the whole assembly.
The molten glue is injected at the upper and the lower points of the application roller where heating elements are built in to maintain optimum working temperature.
Automatic temperature control by electronic thermostat preventing the scorching of the glue when the machine is idle. Glue tank (1,5 kg capacity) of solid aluminium casting specially machined to leave the interior surface of the glue pot even, with no edges and sharp angles to facilitate the flow of the molten glue and its draining when cleaning cycle is performed.
OPTIONAL: DUOMELT upgrade pack, allowing the use of the unit with both EVA and PUR adhesives. The option pack includes a simple and efficient draining system for the residual glue in the gluepot and the necessary software to support this feature.
Pressure Rollers
A group of 2 rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle.
SIKO numerical counter for unit adjustment to 0,4 – 2 mm.
End Trimming (snipping) V-2
Single support / single carriage / single through shaft HF motor (0,2 kW / 12000 rpm) / two sawblades, performing the front and the rear trim cut cycles.
Soft and precise movement of the carriage slip on precision prismatic guides.
Tooling: TCT saw disk set Ø100x32x3 Z30.
Top & Bottom trimming JC-2
2 separate units for the machining of the excess of the edge band along the upper and the lower edges of the panel.
2 HF motors of 0,27 kW / 12000 rpm with milling cutter heads with TC inserts.
Toller type tracers for work with high gloss and 3D effect panels and edges.
Tooling:  milling cutters with TC changeable blades set Ø65 x 20 x 20 Z4 R2

 

Control Panel 5,6”
Robust 5,6” TFT colour touch LCD.
User friendly control with direct connection to the PLC, providing quick access and monitoring of all machine functions (start/stop, program editing, parameters check & editing, alarms visualization, PLC I/O diagnostics) in real time.
Multi-language support and 128 Mb of memory for storage of screen data and job programs.

 

Glue Scraper RR-8 – OPTIONAL
Designed to remove possible rests of glue on the top & bottom surfaces of the panel.
Two blade holders with independently adjustable vertical copying devices.
Blow nozzles for tracer cleaning.
Manual positioning of the station in ON/OFF position.

 

 

Main UK Distributor Of New And Used Cehisa Flexy Edgebanders Based in Central Scotland

London – 07867 950 153 ● Telford – 07746 486 341

Glasgow – 01236 432 700 ● Manchester – 07909 290 209

Cehisa Flexy Edgebander

Other products in the Cehisa Edgebander range.

Cehisa Compact PS Edgebander Pre-Milling