Pro Concept series can be equipped with all the operative groups. This allows working with hot melt glue EVA or PUR (optional) or any kind of edge PVC, ABS, SOLID WOOD and LASER EDGE (optional), turning it into a high qualified machine for any kind of need indicated for small and medium industry.

Cehisa Concept Pro 10 Series Edge Bander. A hot melt automatic through-feed edge bander suitable for melamine, PVC, ABS, PP and veneer edging up to a thickness of 3 mm and solid edging up to 8 mm. A 7″ or 10″ touch screen control gives the operator quick access for monitoring all machine functions, program editing, start/ stop, alarm diagnostics, parameters check and editing etc all in real time.

Panels are fed through the machine with an industrial chain-track system running on ground steel guides. Non-marking traction pads ensure a positive feed without damaging the panel surface while the synchronized top pressure beam with two sets of rollers keeps the panel secured against the track.

As standard the eight models within the Pro Concept range all include the following;

Cehisa Pro Concept Feeding unit

• roll tray for edging
• feed up to 8 mm thick solid edging manually
• precision timed automatic edging feed minimizing wastage
• pneumatic cut-off guillotine
• optional automatic magazine feeder for solid edging

Pro Concept Glue application unit (M-2NS)

• new design with improved thermodynamics for quicker heating
• quick change system for swapping the unit over in less than 60 seconds
• full TEFLON coating
• molten glue injected at the upper and lower points of the application roller where inbuilt heating elements maintain optimum application temperature
• automatic temperature control by electronic thermostat to prevent scorching of glue while machine idle
• 1.5 kg glue tank capacity of solid aluminium casting machine to a smooth finish to allow uninterrupted glue flow
• optional DUMELT system for use of both EVA and PUR adhesives

Cehisa Pro Concept Pressure rollers

• three rollers exert pressure to the edging against the panel to achieve adhesion
• first roller is driven, the second and third are idle
• the first roller is cylindrical and the second two conical in opposing positive and negative directions
• SIKO digital readout for unit adjustment to 3 mm edge/ 8 mm solid edge

Pro Concept End trimming units (V-7)

• two independent high frequency sawing units running at 12,000 rpm trim the ends of the edging flush to the panel
• precision prismatic guides ensure continual accuracy and durability
• each unit can be tilted by 2 degrees for a cleaner finish

 Pro Concept Top and bottom trimming units (BC-5)

• two high frequency sawing units running at 12,000 rpm trim the excess edging from the top and bottom of the panel
• horizontal and vertical tracers with SIKO digital readouts for easy and precise adjustment
• the two independent units can be tilted up to 20 degrees
• each unit equipped with TC insert milling heads
• roller type tracers work with high gloss and 3D effect panels and edges